Are you still relying on those traditional routers that offer connectivity to a limited space? If yes, then it’s high time to switch from them to mesh technology routers like Orbi. After you rightly conduct the Netgear Orbi setup, you get access to seamless, uninterrupted and lightning fast wifi speeds. You can easily watch high definition videos without any lag and buffering, you can work from your balcony, terrace and from every nook and cranny of your abode. Because Orbi’s network is scalable. You can easily fill up each corner with wifi signals by using additional Orbi satellites. So for unlocking the Orbi to its full potential you must read out the whole post. 

Gather All Setup Components 

For Netgear Orbi setup, you need a few basic items. Collecting them beforehand not only allows you to conduct the setup process quickly but also smoothly. The requirements are:

• A modem with an internet plan. 
• The Orbi unit, its satellites alongside power adapters. 
• An Ethernet cable. 
• Thereafter a wifi enabled device.
• Next up, you need accessibility to the electrical powerboard. 

Plot The Orbi Unit Strategically 

Start the Netgear Orbi setup process by first hunting out the perfect placement spot for the Orbi. You should choose a center spot of your abode or the place where you use most of your smart gadgets. This spot should offer proper ventilation. It must not have unnecessary blockages like thick concrete walls or heavy furniture set. Remember there are few metal and electronic items that can easily mess up the setup. To name a few these are: microwave, aluminum doors, refrigerator, cordless phones, bluetooth devices, baby monitors, fish tanks, vigilance cameras and other gadgets of similar nature. Additionally, never make a mistake of keeping the networking device behind any object. Ideally, you should choose a highly elevated spot for its placement. 

Connect Hardware 

After you finalize the placement spot for the router, you can now connect the hardware together for a successful Netgear Orbi setup. So first up, disconnect the existing router. To avoid any problems with the new setup, make sure you reboot the modem.

Now take the ethernet wire. With its help establish a connection between the modem and the Orbi. After that, grab the power wire. Using it, power on the Orbi. The device won’t get ready for the setup immediately. Rather it will take around five minutes to show a stable white light. This white light indicates the completion of the booting process and thus you can now move forward to the next Netgear Orbi setup step. 

Login Into The Main Setup Page

For login, first take your smart device. Turn on its wifi. Now as you move to the Orbi router’ base you’ll find the username and the security details. Use these details and pair the smart gadget to the Orbi. 

After that on the same gadget, launch the internet browser. For Netgear Orbi setup, you must choose a compatible browser. You can pick between internet explorer, chrome, firefox, safari and edge. As all five of them work perfectly with Orbi. Now head to the address column. If your Orbi router’s model is new then in the column type:

• orbilogin.local
• 10.168.168.1

Whereas if the router’s model is older then you can login via:

• orbilogin.com
• 192.168.1.1

As you click on the Enter key, you have to agree to terms of use and then tap on Next. 

Follow The Prompts 

For completion of Netgear Orbi setup, you have to do these steps:

• First place the Orbi satellites strategically in different areas of your abode. The satellites must be within the range of the main unit. Because effective communication between the satellite and router is non-negotiable. Then power them on. 
• On the setup interface, click on Next. Now as the satellites are detected successfully, you’ll be prompted to type admin password. Do so and then choose two questions of security. Answer them and click on Next. 
• Moving further, you now get a chance to personalize the wifi network name as well as the security credentials. Once done, tap on Next.
• Now link your device to the  newly created network. If connected successfully, then tap on “I am connected to it”. 
• Finally, as you again click on Next, the firmware page opens up. If updates are available then tap on Update all and wait for the installation to complete. As it completes, you can rest easy knowing the Netgear Orbi setup process is all done. 

How To Reset The Orbi?

Want to redo all the configuration from scratch or have you come across a major technical glitch? No matter what exactly the situation is, in both scenarios reset can help. To reset the Orbi:

• Power it on. 
• Take a sturdy toothpick or something that looks like it. 
• Insert this pin into the reset port of Orbi. 
• Push and wait till the indicator of Orbi starts to flicker. 
• On release, the device has now returned to its default settings. 

For other queries, connect to the customer support team.